In the construction waste crusher processing line, we may think that he has little effect, but in fact it is indispensable in the process of building waste disposal, which not only improves the surrounding environment, but also is available Resources have also been greatly improved, it can be seen, Construction Waste Crusher
processing equipment is essential. SBM machinery below to tell you about the use of some of the useful parts of construction equipment and the need to avoid dangerous matters. Hope to give you a little help
1, boot work, should be carefully examined to recognize the ministry is not qualified, qualified before the official start work.
2, installed at the point should ensure that the loading and unloading of the tape in the center of the direction, not allowed in a large height directly unloaded to prevent injury to tape and lead to tape deviation.
3, the reducer, motor, coupling and all the drum bearing the temperature is not normal, movement is not abnormal.
4, the conveyor belt material should be carefully observed during the delivery of the situation, found abnormal should be timely downtime.
5, the conveyor belt tension is not appropriate, with or without skid deviation, card grinding and other abnormal appearance.
6, often check the hydraulic coupler, hydraulic system, reducer is not leaking, regularly check the amount of oil is not appropriate, and timely adjustment to add.
7, Construction Waste Crusher
equipment before starting, should first start close to unload the drum motor, in the drive near the storage tank of the motor, so that the surface when the load exceeds the load.
8, maintenance should be shut down, should be hung on the stop signs.
9, before the shutdown should clean up the debris.
10, the conveyor belt on the material after processing completely in order to stop the construction waste disposal equipment.